The sequence to reuse on the job
- 01Identify straight or curved preparation edges
- 02Check whether one or both members are prepared
- 03Name the groove family
- 04Read angle and root opening only after type
INTERMEDIATE · 5–7 MIN · 5 DECISIONS · NO COUNTDOWN
Groove Weld Symbols Identification Drill
Practice groove weld symbols by comparing square, V, bevel, U, J, and flare preparations according to which members are prepared.
THIS DRILL IS FOR YOU IFV, bevel, U, and J groove symbols blur together.
TRAINING PRINTGroove welds
THE DECIDING RULEGroove symbols describe joint preparation; compare which member or members are prepared.
WHERE IT PAYS OFFJoint prep · fit-up · exam review
SUCCESS AFTER THIS ROUNDName the groove family and the preparation it implies.
WHY THIS MISS MATTERS
One prepared edge or two? That is the deciding clue.
A V-groove and bevel-groove can serve similar-looking joints, but the symbol tells whether both members or only one member receives the preparation.
Leave with a usable decision
- ✓Separate V-groove from bevel-groove
- ✓Recognize U, J, and flare families
- ✓Connect symbol shape to member preparation
QUICK CLARIFICATIONS
Questions that cause this mistake.
Read these after the drill if the same shortcut keeps appearing.
What is the difference between a V-groove and bevel-groove symbol?+
A V-groove represents preparation on both members, while a bevel-groove represents preparation on one member.
When should angle and root opening be read?+
First identify the groove family, then read angle, root opening, depth, and other values in their specified positions.